NEC SX-Aurora TSUBASA A300-4, Руководство пользователя

Страница: 7 / 31

7
Chapter 1: Introduction
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below.
Figure 1-1. Control Panel View
Control Panel Features
Item Feature Description
1 Information LED See table on the following page.
2 NIC2 LED Indicates network activity on the LAN2 port when flashing
3 NIC1 LED Indicates network activity on the LAN1 port when flashing
4 HDD LED Indicates activity on the hard drive when flashing
5 Power LED
Indicates power is being supplied to the system power supply units. This LED
should normally be illuminated when the system is operating.
6 UID LED
The unit identification (UID) button turns on or off the blue light function of the
Information LED and the blue LED on the rear of the chassis. These are used to
locate the server in large racks and server banks.
7 Power Button
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing
2 3 4
1 5
6 7