Second F
old Here
Cut Here
Cut Here
Cut Here
Cut Here
Cut Here
Cut Here
Connect card with socket on Controller Board (C).
Use screw, removed in Step 2, to fasten card (D).
13.
14.
Connect the other end of the LocalTalk cable to your
Macintosh Computer.
Install the NEC SuperScript 1800 PPD onto your
Macintosh computer as described in Chapter 3,
"Installing the Software," of the SuperScript 1800 User’s
Guide.
See Chapter 8, "Printer Options," for information about
using the serial port.
18.
19.
20.
C
D
Installing the LocalTalk and Serial Interface Card
Position the printer so you have access to the back.
Remove screw from the metal back plate (A).
Insert Interface Card into the printer (B).
10.
11.
12.
A
B
Part No. 808-878301-011A
Connect
with socket
Installing the LocalTalk and Serial Interface Card
(cont)
E
Second F
old Here
Use previous procedure (Step 1 to Step 9, "Accessing
the Printer Controller Board") as a guide to replace
printer side-panel, Tray 2, and printer cables.
If only using the serial connection, go to Step 11.
Connect Apple LocalTalk cable to interface card (E).
15.
16.
17.
