NEC SpectraView, Руководство пользователя

Страница: 18 / 68

18
Profiler
User Manual
The main window is clearly structured and easy to handle. So you can
achieve a proper calibration and profile for your monitor very quickly
and easily. All important information will be shown in the main window
and you will get a quick overview about the present status.
Measurement Device
After the first start of SpectraView Profiler you need to select your
measurement device first. For this purpose, please select your
measurement device under „Instrument“ in the menu bar or click onto
the empty icon in the main window of
SpectraView Profiler. In order to
use SpectraView Profiler, you need a supported measurement device.
The Main Area
In the main area of the main window you can setup all parameters for
calibration and profiling.
Presets
Via the settings tab you have direct access to the presets of
SpectraView Profiler.
If you would like to use other settings than those defined in the presets,
you can enter them in the following windows by clicking <Next>. You will
be guided through the process step by step by
SpectraView Profiler.
During the calibration and pro- filing
of your monitors, please deactivate all
screen savers and the power manage-
ment of your operating system.
Otherwise incorrect measurements will
occur.
Tip: Screen Saver
Please check your user permission before
you start SpectraView Profiler. Only sys-
tem Administrators have the permission to
write to the system folder of an operating
system where all the ICC-profiles are
stored.
Mac users with limited user persmis- sion
can store ICC-profiles in the user folder.
Windows users do need administrator
permission during the use of basIC- Color
display. Otherwise the generated profile
can not be stored in the system folder.
If you do not have adequate user per-
missions SpectraView Profiler will display
an error message after the profiling
measurements.
Tip: User Permissions