NEC SL1100, Сетевое руководство

Страница: 33 / 292

Networking Manual 5 - 1
Pr
og
ra
mming
5
Programming
S
ECTION
1
B
EFORE
Y
OU
S
TART
P
ROGRAMMING
This chapter provides you with detailed information about the NEC SL1100
program blocks that may be required to connect the NEC SL1100 to a data
network and to configure the VoIP function. The configuration and
programming examples, found in the earlier chapters, can be a useful
reference when programming the data.
When using this chapter, note that the information on each program is
subdivided into the following headings:
Description describes what the program options control. The Default
Settings for each program are also included. When you first install the
system, it uses the Default Setting for all programs. Along with the
Description are the
Conditions which describe any limit or special
consideration that may applies to the program.
The reverse type (white on black) just beneath the Description heading is
the program access level. You can use only the program if your access
level meets or exceeds the level the program requires. Refer to
Section 2
How to Enter Programming Mode on page 5-2 for a list of the system
access levels and passwords.
Feature Cross Reference provides you with a table of all the features
affected by the program. You should keep the referenced features in mind
when you change a program. Customizing a feature may have an effect on
another feature that you did not intend.