PX-TUAN-01 Instruction Manual
-19-
②
CHANNEL LABEL:
The channel label menu gives you the option to write or change the name of each stored
channel. The selected channel will be displayed in the background for easy recognition
.
Press "
▲
" or "
▼
" and “OK” to activate the required channel, then press "
▲
" or "
▼
"
button to pick a numeral or alphabetic character; press "
▶
" to move to next column.
After entering (maximally six characters) and pressing “OK” you come back into the
previous mode. You can leave the label mode at any time by pressing the EXIT key.
7 CHANNEL LABEL
> CH 001 - - - - - -
CH 002 - - - - - -
CH 003 - - - - - -
CH 004 - - - - - -
CH 005 - - - - - -
Select the required channel and open label mode by pressing the “OK” key.
③
CHANNEL SWAP:
It is advised to complete channel label function before you start with the CHANNEL
SWAP function.
Press "
▲
" or "
▼
" to select the program you want to swap to the CH 001 position. Press
“OK” key to activate swap mode. Two small arrows will appear at left/right side of the
selected channel number. Press "
▲
" key and go to channel 001. Press “OK” key and
the previously selected channel will be swapped with the actual program on channel 001.
With "
◀
" or "
▶
" button you can skip 5 channels at a time.
Repeat till all channels are in the desired sequence.
8 CHANNEL SWAP
> CH 001 AAAAA
CH 002 BBBBB
CH 003 CCCCC
CH 004 DDDDD
CH 005 EEEEE
Select channel to be swapped and confirm with “OK”.
Go to desired channel number and confirm again with “OK”.
