manualshive.com logo in svg

NEC POWERMATE P ETC, Руководство пользователя

Поделиться
Скачать
NEC POWERMATE P ETC Скачать руководство пользователя страница 29

    

 2-2   Getting Started

„

Double click
Some actions require a double click to execute them. To
“double click” an object, point to the object and press
and release the left mouse button twice.

„

Press
Pressing the mouse button holds an action until you
release the mouse button.

„

Drag
Dragging your mouse attaches your pointer to an object
on the screen and allows you to highlight text or move
an object. To drag an object, point to the object, press
the left mouse button, and move the mouse to the new
location.

 Typical screen objects that you click or double click are
icons, buttons, and menu options.

 

NOTE

If your mouse pointer disappears, move your

mouse in wide circles to bring it back into the
screen.

 For more information about your mouse, see your online
User’s Guide and your application documentation. Also
included in the online documentation is information on
cleaning your mouse.

USING ONLINE DOCUMENTATION

 Your system comes with documentation conveniently
available at your fingertips. No more looking for printed
documents. Information about your system is available right
from the Windows 95 desktop.

Содержание POWERMATE P ETC


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды