background image

2

Checking Included Accessories

Please open up the box and check that all included items and accessories are there. 
Please immediately contact the place of purchase if any items happen to be missing 
or damaged.

1. Check contents of the box.

*1 : Included with models MC32M/B-H and MC34L/B-H
*2 : Included with models MG32M/B-H and MG34L/B-H
*3 : Included with models MG32M/B-H and MG34L/B-H (Japanese versions)

2. Confirm that the model number and serial number on the base unit matches 

the model number and serial number written on the warranty.

If they happen to differ, please contact the place of purchase immediately. Please 
also keep your written warranty in a safe place for future reference.
If your encounter a breakdown during the warranty period, we shall provide repairs 
based on the conditions specified in the warranty.
For repairs after the warranty period has expired, please consult the place of 
purchase or one of our specified customer service locations. If it is deemed possible 
to regain functionality, we are able to perform paid repairs at the customer's request.

Connecting Included Accessories

Do not touch connector terminals when connecting any items.

Failure to do so may cause damage.

Connect the LAN cable, only after completing Windows setup and firewall 
configuration.

This ensures that your computer can be safely connected to a network.

1. Attaching the Stands

This computer includes Stands that keep your computer stable when it is positioned 
vertically. When you position the computer vertically, attach one or two Stands to 
ensure that it will not fall over.
Stands are not necessary when the computer is positioned horizontally.
In such a case, proceed to "2. Connect the keyboard and the mouse" (p.2).

1

Pull out the rear end of the Stand, and place the Stand where you wish to 
place the computer.

Pull out the Stand until it is locked and you hear a click sound.

2. Connect the keyboard and the mouse

1

Connect the purple keyboard port to the purple keyboard port (

).

2

Connect the mouse to a USB port (

 or 

).

Checking that all included accessories are present

保修书 

*1

修理サ−ビス保証規定書

 

*3

安全使用说明 

*1

Instructions For Safe Use 

*2

安全にお使いいただくために

 

*3

NEC软件的使用条件 【即EULA】(对顾客的特别提示)
(请务必先仔细阅读如下内容后,决定是否打开本个人电脑的包装)

*1

Terms and Conditions for using software (For Customer)
(Please read this before opening the package) 

*2

ソフトウェアのご使用条件(お客様へのお願い)

*3

Base unit

Power cord

DisplayPort to DVI-D adapter

Keyboard

Mouse

Stand

Cable stopper

Application Disc

Recovery Disc 

*2*3

User's Guide

1

Important points when connecting

Connecting power sources

2

Содержание PowerMate MB MC32M/B-H





























Отзывы: