NEC POWERMATE ES Series, Руководство пользователя

Страница: 4 / 6

4 NEC PowerMate ES Series Release Notes
9.
Change the path in the window to
C:\I386
. Click
Continue
. The Network window appears.
If Yes was clicked in step 8, skip to step 16. If No was clicked in step 8, the Windows Setup
window appears.
10. Click Close . The Microsoft TCP/IP Properties Box appears.
11. Fill in the IP Address , the Subnet Mask , and the Default Gateway in the “Specify an IP
address” area.
12.
Click the
DNS
tab and enter the host and domain name in the DNS display.
13. Click the Identification tab and change the Computer Name if appropriate.
14. Click the WINS tab and enter the WINS address if appropriate.
15.
Click the
Routing
tab and enable IP forwarding if appropriate.
16.
Click
OK
. When prompted to restart the system, click
Yes
.
Changing Network Settings on Systems with Windows 2000
All systems are configured with the NetBEUI and NWLink protocols enabled. However, before
you connect a system to your network you might need to:
„
enable a different network protocol
„
disable unneeded protocols for enhanced system performance
„
add or change network, domain, and gateway information.
The following procedures describe how to enable TCP/IP and how to provide network, domain,
and gateway information. (If a different protocol is enabled, the menu choices might differ from
those described in the procedure.)
Network Type and/or Workgroup
Use the following procedure to set up a network type and/or workgroup.
1. From the Windows desktop, click Start on the taskbar, point to Settings , and click Network
and Dial up Connections
.
2.
Click the
Network Identification
hyperlink in the right window.
3. From the System Properties box, click the Network ID button. The Network Identification
Wizard launches.
4. Follow the instructions to set up your network type and/or workgroup. Get this information
from your system administrator.
5. When you have completed the wizard setup, click Finish . At the message, “You must
reboot this computer for the changes to take effect,” click
OK
.
6. At the System Properties screen, click OK .
7. Click Yes to restart your system.
TCP/IP Setup
Use the following procedure to set up TCP/IP.
1.
From the Windows desktop, click
Start
on the taskbar, point to
Settings
, and click
Network
and Dial up Connections
.
2. Click Add Network Components .