background image

PowerMate ES 5250 Series Release Notes   A-13

Getting Intel Technical Support

For world wide 7 days a week, 24 hours a day technical support, please visit the
Intel support website at 

http://support.intel.com

.

Email: 

[email protected]

.

In the United States, call 

800-628-8686

 from 5:00 a.m. to 5:00 p.m. Pacific

Standard Time.

For world wide phone contacts, please see

http://support.intel.com/support/feedback.htm

.

Windows 95 Issues

The following material describes information specific to systems running the
Microsoft

®

 Windows 95

®

 operating system.

Controlling CD Audio

CD audio volume is not controlled by the Windows 95 taskbar Volume Control.
To control CD audio volume, access your CD player program. Move the volume
slider bars up or down to increase or decrease CD audio volume.

Using Cheyenne Backup

The following notes describe conditions and procedures specific to systems with
the Windows 95 operating system running Cheyenne Backup. See also
“Installing Cheyenne Backup” earlier in this document.

Backing Up Large Drives

When Cheyenne Backup is set to automatically back up a system drive greater
than 2.1 GB to a network drive, multiple instances of the Copy program might
be launched. The number of Copy programs launched depends upon the number
of drive letters assigned to the hard drive. The first instances end with an
indication that no data was transferred. The last instance completes the backup
successfully.

Using Cheyenne Backup with LANDesk Client Manager

Cheyenne Backup can occasionally report that a backup was incomplete.
Cheyenne Backup does not back up files that are open, so it might report this
condition if the backup was run while files are open, or because LANDesk

®

Client Manager itself is running.

When this happens, the report window displays buttons for options to back up
files or utilities that are open. See your documentation on Cheyenne Backup for
more information on these options.

Содержание POWERMATE ES 5250 - S

























































Отзывы: