background image

1-8   Reviewing System Features

Audio Connectors

Your system unit has the following audio connectors:

!

 

Microphone in jack
Use this jack to connect a microphone for recording audio information
in your data files.

!

 

Line in jack
Use this jack to connect a stereo audio device such as a stereo
amplifier or a cassette for playback or recording.

!

 

Headphone jack
Use this jack to connect an optional headphone set. Plugging in the
headphone set disables the built-in system speakers.

Universal Serial Bus Ports

The system unit comes with two USB ports. The ports allow you to easily
and conveniently add plug and play USB devices without opening up the
system. You simply plug the USB device into a port. You can connect up
to 127 USB devices including a keyboard, mouse, monitor, printer,
scanner, or speaker set.

Hard Drive

The system comes with either a 10.0-gigabyte (GB) or a 20-GB enhanced
intelligent device electronics (EIDE) hard drive. The drive features ultra
direct memory access (DMA) 66 technology for fast data transfer. The
drive also features Self-Monitoring, Analysis and Reporting (SMART

®

)

technology.

The drive is located inside the system unit, behind the hard drive access
panel on the right side.

Hard disk activity is indicated by a flashing green lamp on the front of the
system unit.

Anti-theft Bracket

Your system comes with an anti-theft bracket installed on the right side of
the system unit, below the hard drive access panel. Secure your mouse
and keyboard cables within the anti-theft bracket to make it difficult to
remove the cables from the system.

Содержание POWERMATE 2000 - 01-2001










































































































































Отзывы: