NEC PE401H, Руководство пользователя

Страница: 34 / 87

27 ... English
Installation
Powering On/Off the Projector

Turn on the projector
first and then the signal
sources.
or

(*)When “Power-
Saving” is selected for
“Standby Mode”,the
Power LED will turn
red; when “Normal” is
selected for “Standby
Mode”, the Power LED
will turn orange.
1
2
Lens Cover
Power

When you first
turn on the projec-
tor, you will get the
Startup menu. This
menu gives you the
opportunity to select
the menu languages.
To select the language,
use the
, ,
, or
button on the
remote control. Select
your language. Refer
to Language on page
42.

While the POWER
indicator is blinking
blue in short cycles,
the power cannot be
turned off by using the
power button.
Powering On the Projector
1. Slide the lens cover.

2. Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red. (*)
3. Turn on the projector by pressing “POWER” on the remote
control or on the control panel.

The Power indicator
will flash blue. The startup screen (NEC logo) will be dis-
played. and the Power indicator will turn steady blue.
4. Turn on your source (computer, notebook, video player,etc.)
The projector will detect your source automatically.

If you connect multiple sources at the same time, use the
“SOURCE” button on the control panel or use “COMPUTER
1”, “VIDEO”, “HDMI” on the remote control to switch in-
puts.