NEC PA521U Скачать руководство пользователя страница 185

Страница: 185 / 293

171

6. Installation and Connections

1. Press the

button to set the projector to the standby

mode, then disconnect the power cord.

Wait for the projector to fully cool off.

2. Press down on the buttons on the left and right and then

pull the filter cover towards you to open it.

The cover will open about 90 degrees before it stops.

Filter cover

Button

3. Remove the filter unit by pulling out the tab.

Filter unit

Tab

4. Slowly insert the wireless LAN unit into the USB (LAN)

port.

• Remove the wireless LAN unit’s cap, set the unit with the

front (the side with the indicator) facing upwards, hold the
back edge and insert the unit gently.

Next, press the wireless LAN unit in with a finger.
• The cap you have removed will be used when the wireless

LAN unit is removed, so store it in a safe place.

NOTE: If the wireless LAN unit is hard to insert, do not push it in by

force.

WIRELES

WIRELE

Wireless LAN unit

5. Mount the filter unit back onto the projector cabinet.

Insert the filter unit onto the projector with the sides on which

the left and right hooks are located on the outside.

Hook

Содержание PA521U






































































































































































































































































































Результаты поиска

Содержание PA521U

Отзывы:

NEC PA521U, Руководство пользователя, Страница: 185 / 293

Результаты поиска

Содержание PA521U

Отзывы: