NEC NWTL456, Руководство пользователя

Страница: 7 / 17

INLET HOSE CONNECTION
Be careful not to confuse the hot water inlet and the cold-water inlet.
In using only one water tap or in case of one water inlet valve attached, connect the inlet hose
to the cold-water inlet valve.
For Ordinary Tap
1. Pull down the collar of the
inlet hose to separate it
from the water tap adapter. 2. Loosen the four screws
properly in fitting onto the
water tap 3. Fit the water tap adapter
into the water tap and tighten
the four screws evenly while
pushing up the adapter so
that the rubber packing can
stick to the tap tightly.
4. Remove the tape, and
screw connector B into
connector A tightly. 5. Connect the inlet hose to
the water tap adapter by
pulling down the collar of the
hose end. 6. Connect the inlet hose
adapter of the hose to the
water inlet of the washer by
turning it clockwise to tighten.
For Screw -Shaped Tap
1. Connect the inlet hose to
the water tap by screwing
the connector tightly. 2. Connect the connector
inlet supplied necessary. 3. Insert the inlet hose
adapter into the water inlet of
the washer and turn it to
tighten.
Connector A
Connector B
Tape
Connector
Hose
Connector
Connector
Inlet
Connector
Hose
Connector
• Please check the rubber
packing inside the inlet
hose adaptor of the hose.
• Check the packing in the inlet