━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Rear View
7 Jumper Blocks
These blocks of jumper locations set the configuration for the CD R/RW drive.
(See page 10, “Jumper Setting” for details.)
8 DIGITAL OUT Connector
This connector is used to connect CD Digital Audio to an audio board.
9 Line Out Connector
This connector is used to connect CD-Audio to an audio board.
10 I/O BUS Connector
This BUS connector is used to control the CD-R/RW drive and sent data.
Use a flat ribbon cable to connect your computer to the CD-R/RW drive.
Connect the colored side of the ribbon cable to the side marked with the arrow (
▽
).
11 Power Connector
Use this to provide operating power from the host computer.
11
10
9
8
7
