background image

i

Important Information

Safety Cautions

Precautions

Please read this manual carefully before using your NEC NP64/NP63/NP54/NP43 projector and keep the manual 
handy for future reference.

CAUTION

To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be easily 
accessible.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical 
shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information concerning the operation and maintenance of this 
unit has been provided.
The information should be read carefully to avoid problems.

WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGS 
CAN BE FULLY INSERTED.

DOC Compliance Notice (for Canada only)

This  Class  B  digital  apparatus  meets  all  requirements  of  the  Canadian  Interference-Causing  Equipment  Regula-
tions.

Machine Noise Information Regulation - 3. GPSGV,

The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

Disposing of your used product

WARNING TO CALIFORNIA RESIDENTS:

Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California 
to cause birth defects or other reproductive harm. 

Wash hands after handling.

EU-wide legislation as implemented in each Member State requires that used electrical and electronic 
products carrying the mark (left) must be disposed of separately from normal household waste. This in-
cludes projectors and their electrical accessories or lamps. When you dispose of such products, please 
follow the guidance of your local authority and/or ask the shop where you purchased the product.
After collecting the used products, they are reused and recycled in a proper way. This effort will help us 
reduce the wastes as well as the negative impact such as mercury contained in a lamp to the human 
health and the environment at the minimum level.
The mark on the electrical and electronic products only applies to the current European Union Member 
States.

Содержание NP43 Series












































































































Отзывы: