NEC NP09CM, Инструкция по установке и настройке

Страница: 14 / 16

14
Adjustment of the Projection Angle
Fine Adjustment
After the adjustments, check that the parts are fixed securely.
Loosen the same screws that were used in the distortion adjustment and
finely adjust the angle so that the projected image fits the screen, then tighten
all the screws (i.e., a total of 14 including the inclination axis screws).
Specifications
Product Name : Projector Ceiling Mount Unit
Model : NP09CM
Adjustment angle : Up-down angle +/-10 ˚
Left-right angle +/-10 ˚
Inclination angle +/-10 ˚
Dimensions : 234 (W) x 213 (D) x 97 (H) mm
(when assembled, not including protruding parts)
Weight : Approximately 1.5 kg
Supplied Items : Projector mounting screws (M3) .................................3
Up-down angle adjustment screws (M5)......................4
Installation and adjustment manual (this document)....1
Specifications and design are subject to change without notice.
NP09CM̲E 08.2.15 5:37 PM ページ 14