NEC NP06CM, Инструкция по установке и настройке

Страница: 12 / 16

12
2
3
Adjust the Up-Down Angle
Adjust so that the north-south image is projected to the center of the screen, then
securely tighten the four up-down angle adjustment screws.
Maximum adjustment angle +/-10 ˚
Up-down angle adjustment screws
(There are also screws on the opposite side.)
Adjust the Inclination
Adjust so that the image is projected to the screen without being slanted, then firmly
tighten the four inclination adjustment screws. Lastly, tighten the two inclination axis
screws if they are loose.
Maximum adjustment angle +/-10 ˚
Inclination adjustment screws
(There are also screws on the opposite side.)
Inclination axis screw
If the adjustment does not work out, readjust from Step
1
.
After the adjustments, check that the parts are fixed securely.
Adjustment of the Projection Angle
10 ˚
10 ˚
10 ˚ 10 ˚
NP06CM-E 07.3.20 9:02 AM ページ 12