NEC NP01TK, Инструкция по установке и настройке

Страница: 4 / 50

ENG-3
■
Dimensions of Parts
The drawings show the external view of the mounting unit for table projection, the movement range when mounting the projector, the sliding range of
the table clamp knob and the floor securing bolt hole dimensions. *The mounting dimensions shown are for a projector set to project downwards.
Introduction
■
Packaged Parts
Check that the parts below are included in the package.
Slide arm: 1 set Projector mounting screws (M4 × 10 mm): 4 units
Special screws for attaching the projector.
Assembly screws (M4 × 15 mm): 10 units
Screws for assembling the slide arm and U-shaped bracket and mount-
ing the table securing bracket.
* The bolts and screws for securing the floor shall be prepared sepa-
rately depending on the installation work.
Installation and adjustment instructions (this manual): 1 copy
U-shaped bracket: 1 set
Table securing bracket: 1 unit
Bracket for securing the mounting unit
for table projection to the table.
565
125
652
142
224
107
60
⌀
56
15
95
22
368
75
82.5
80
4-
⌀
6.4
188
F.L.
396
264
188
142.5
Projector mirror center
U-shaped bracket / table securing bracket
Longest (when cable cover is fitted)
(movement
range)
(maximum movement)
Hole position and dimension drawing for floor
securing bolts
(maximum slide)
Unit: mm
(sliding range)
Table clamp knob
Projector / unit center
Cable cover