20
External Equipment Connection
When connecting to external equipment, please ensure you turn the main switch OFF
to prevent any damage to the equipment.
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
A/V INPUT
1. Connect the A/V out jacks on a VCR to A/V-IN jacks on
the TV.
2. Press the
TV/AV
button to select
VIDEO
mode.
3. Press the
PLAY
button on the VCR.
The VCR playback picture appears on the TV screen.
Note
: If you have a mono VCR, connect the audio cable
from the VCR to the
L(MONO)
socket of the set.
COMPONENT INPUT
1. Connect the Video outputs (Y Cb Cr) on a DVD
to the COMPONENT on the TV.
2. Press the
TV/AV
button to select COMPONENT
mode.
3. Press the
PLAY
button on the DVD.
Antenna connection
1. Connect RF out on the VCR to the Antenna input
on the rear of the TV.
2. Connect the antenna cable to the antenna in
jack on the VCR.
3. Press the TV/AV button to select Antenna input
source.
4. Press the PLAY button on the VCR.
VCR
POWER
ANT.
POWER
L R
COMPONENT
(DVD)
VCR
A/V-IN
L(MONO) R
21
External Equipment Connection
S-VIDEO INPUT
If using an
S-VIDEO
source, the picture quality will be
improved over a video source.
1. Connect the S-VIDEO output of a VCR to the
S-VIDEO
input on the TV.
2. Connect the audio cables from the S-VIDEO
VCR to the
L (MONO) R
inputs on the TV.
3. Select
S-VIDEO
mode by pressing the
TV/AV
button repeatedly.
4. Press the
PLAY
button on the VCR.
The VCR playback picture appears on the screen.
Headphone jack
Insert the headphone plug to the headphone jack on the TV. You can listen to the
sound through the headphone; no sound form the speaker on the TV. To adjust the
headphone volume, press the VOL
Ïq
button. If you press the
MUTE
button, the
sound from the headphone is turned off.
VCR
A/V-IN
L(MONO) R
S-VIDEO
Headphone