
-30-
DTMF Length
Your phone can transmit tones, referred to as
DTMF tones, when the keys of the phone are
pressed. These tones allow your phone to suc-
cessfully communicate with automated tele-
phone services such as banking transactions and
credit card inquiries. You can set your phone to
transmit short tones or long tones. (See the fol-
lowing paragraph for additional information on
short tone use and long tone use). To select the
length of the tone, press
M
422
. Press
1
to select the short tone setting or press
2
to select the long tone setting. Press
E
to exit
the DTMF length menu.
Short Tone Use & Long Tone Use
You can access most automated systems
by setting your phone to the short tone
selection. If you experience any prob-
lems communicating with an automated
system, set the DTMF length to long and
verify that the capability to transmit
tones (see the following menu selection,
Transmit DTMF Tone) is turned on. Note
that you must press and hold a key, up
to a maximum of three seconds, to
transmit a long tone. Because transmit-
ting long tones can result in slower dial-
ing, you can set your phone to the short
tone selection and only use the long
tone selection, as needed.
Transmit DTMF Tone
For your phone to successfully transmit tones, as
described above in “DTMF Length”, for accessing
automated telephone systems, the capability to
transmit tones must be turned on. (See the fol-
lowing paragraph for additional information on
setting tones on or off.) To select the DTMF tone
setting, press
M
423
. Press
1
to turn
off tone transmission or press
2
to turn on
tone transmission. Press
E
to exit the transmit
DTMF tone menu.
Menu Shortcut
M
422
?
Menu Shortcut
M
423
Содержание NEX 2600
Страница 1: ...NEC 2600 Owner s Manual...