Step 3
Auto Adjust.
As soon as your computer is set to
1024x768
resolution, the monitor automatically activates the
Auto Adjust Function. This function is activated only when the new video signal is received for the first
time. If the image quality after the Auto Adjust is activated is not sufficient, please repeat Step1.
On the right side of the Display Properties window, there is a box labeled
Display
area
. Make sure the
„Screen‰
slide bar
(6)
(6)
(6)
(6)
(6)
is set to
1024x768
.
You may have to restart your computer for this change to take effect. After the restart,
double check the
Display Properties/Settings
window to make sure you are
now at
1024x768
resolution.
(Proceed to Step 3.)
2
1
3
4
5
6
Step 2
Make sure your computer is set up for 1024x768 resolution.
Open the Display Properties window by following this mouse click sequence
(((((1
1
1
1
1, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
indicated
by the numbered arrows below.
If you have questions regarding the setup of your MultiSync LCD monitor, please refer to the user’s manual
or contact the NEC Technical Support Center at 1-800-632-4662.
