Page 4 of 5
North American Telecommunications Group
For Service: 604-856-9155 / [email protected]
Add/Delete/ or Change Mailboxes
1. Press
M
ESSAGE
key at System Admin phone (Usually extension 101)
2. When prompted enter your security code
3. On the display you will see
, press soft key below it
4. On display see
M
GR
.. press key
5. On the display see
C
HBOX
… press key
6. The system will ask you to enter the ma
ilbox… enter the box you want to add, delete or
change
7. At this point listen to the prompts to be guided through deleting the security code for the
box, or deleting the box.
NOTE: if there is no mailbox the system will say:
“there is no mailbox.. would you like to add one: press
1
for YES
8. Press
S
PEAKER
key when all done
NOTE
: When you reset a security code for a mailbox, it will reset it back to system default
[previously provided by NATG]