NEC NEAX2400 ICS, Руководство по функциям, Страница: 75 / 156

NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Page 63
Direct Service Set/Reset D-25
D-25 Direct Service Set/Reset
General Description
When the Attendant responds to guest calls via the GST or ANSWER key on the Console, or when a call is
answered at the Front Desk Terminal, DIRECT SERVICE is established by pressing the associated set/reset key.
Station number dialing, ENTER and EXIT operations are not required. DIRECT-SERVICE SET/RESET is
available for the following:
AUTOMATIC WAKE-UP [A-10]
DO NOT DISTURB [D-11]
MESSAGE WAITING [M-6]
ROOM CUTOFF [R-9]
ROOM STATUS [R-10]
Operating Procedure
The Attendant answers an incoming guest call via the GST or ANSWER key, or the call is answered at the Front
Desk Terminal (guest information is displayed). The guest hangs up after specifying the desired services.
Note:
For AUTOMATIC WAKE-UP [A-10], dial required time after Step 1 and press ENTER.
Service Conditions
1. SET/RESET can be established for one or all of these services simultaneously (any combination), prior to
pressing the CANCL key.
a.) The keys on the Attendant Console are shown in Figure 4 .
Figure 4 Key Pattern on the Attendant Console
b.) The keys on the Desk Console (with hotel/motel add-on module) are shown in Figure 5 .
Figure 5 Key Pattern on the Desk Console
Step Action Result
1
The Attendant presses the desired set/reset function
key.
(Note)
The associated lamp illuminates.
2
Press the CANCL key. The connection is terminated.
WKUP DND MW RC
CHK
IN
AUD
CHK
OUT
STS WKUP DND MW RC
SET
RESET
WUS DDS RCS MWS
WUR DDR RCR MWR CKOUT STS
AUD CKIN