NEC NEAX2400 ICS, Руководство по функциям

Страница: 144 / 156

NEAX2400 IMX Hotel Features and Specifications
Page 132
NDA-24245, Issue 2
S-75 Suite Room Service
S-75 Suite Room Service
General Description
The SUITE ROOM SERVICE feature allows up to four analog stations to serve one suite room. Each telephone will
have its own station number. One station is designated as the primary station. When the primary station is called,
any secondary station in the suite may answer.
Operating Procedure
•
To answer a call:
•
To originate a call:
Service Conditions
1. Each of the telephones in a suite is given an independent station number. One of these is assigned as the
primary station, the others are regarded as secondary to the primary.
2. The primary station number can either be the actual station number of the telephone assigned as the
primary telephone, or a phantom number given to the suite room.
3. The maximum number of analog telephone circuits that can be accommodated in a suite is four circuits.
4. For secondary stations, either of the following procedures can be selected on a system-wide basis:
a.) A secondary station in the suite may be dialed directly. Only the secondary station will ring and
only the secondary station may answer.
b.) Secondary station may only be rung from the Console or Special Administration D
term
.
5. The primary station may originate a call independently.
6. If the primary station is busy, an incoming call to the primary will, depending on system data, allow one
of the following:
a.) Ring idle secondary stations.
b.) The caller hears busy tone.
c.) The call is transferred to the Console.
Action Result
When a call is directed to the primary station, all telephones in the
suite room ring simultaneously. The call is connected to the
telephone that answers first.
The other telephones stop ringing.
Action Result
Each of the telephones in the suite room can originate a call
independently.
Single Suite Room
201 202 203 204
PILOT NO 200
: Primary Station
: Secondary Station