NEC NEAX IPS NWA-008869-001, Руководство по установке

Страница: 21 / 180

CHAPTER 1 GENERAL INFORMATION
– 11 –
NWA-008869-001 Rev.1.0
atch1001.fm
SYSTEM CONDITIONS
Ethernet Connection
For the LAN Ports of In-Skin Router, straight or cross cable (UTP or STP) is required. Prepare the cable
according to the equipment to be connected with the In-Skin Router, such as HUB, ADSL modem or PC.
Digital Private Line Connection
PZ-M649 card is required for connection with the digital private line (T1).
PZ-M650 card is required for connection with the digital private line (E1).
Local Console Connection
In-Skin Router is equipped with a console port. By connecting the local console (such as PC) to the console
port, you can perform basic setup of In-Skin Router from the local console.
As the connecting cable, the MAT cable (MAT CA-P/MAT CA-R/MAT CA-T) is required.
The local console requires a communication software conforming to VT-100. The communication soft-
ware should be set as follows.
Item Setting
Communication rate 9600 bps
Data length 8 bits
Parity None
No. of stop bits 1 bit
Flow control None
SYSTEM CONDITIONS