NEC NEAX 2400 IPX, Руководство по программированию

Страница: 64 / 316

CHAPTER 5 NDA-24305
Page 46
Revision 1.0
CALL FORWARDING-BUSY LINE-PRI
STEP 3: ASPA - Assign an access code to CALL FORWARDING-BUSY LINE Entry, SID=10 and to
CALL FORWARDING-BUSY LINE Cancel, SID=11. Assign Connection Status Index
(CI) for Normal service.
STEP 4: ASFC - Assign the stations to receive CALL FORWARDING-BUSY LINE a Service Feature
Class that allows SFI=9.
STEP 5: AKYD - For D
term
sets, CALL FORWARDING-BUSY LINE may be assigned to a programmable
line/feature key. Assign KYI=1 and FKY=1.
STEP 6: ATNR - Allow tenant-to-tenant connection for Inter- and Intra-tenant connections. Assign Tenant
Restriction Index (TRI)=1. For this feature to be set by the Attendant Console assignment,
assign TRI=3 for Inter- and Intra-tenant connection via the Attendant Console. This allows
a station in one tenant to be Call Forwarded to a station in the same or different tenant. Also
assign TRI=0, station-to-station calling.
STEP 7: ACFO - For tenant-wide CALL FORWARDING-BUSY LINE of an incoming DID and DIT calls,
Assign CF=1 for a destination (CFI) of either the Attendant Console or a station.
Note:
Step 7 is necessary for CALL FORWARDING on a system basis only.
Note