NEC NC1700L, Руководство по установке

Страница: 96 / 119

96
LCD Menu
Panel Key Lock
The control buttons on your projector are locked to be inoperative.
←
Displays the currently selected item with asterisk (*).
← Displays the setting.
Lock Enable a lock on the control buttons on your projector.
Unlock Disable the lock on the control buttons.
NOTE
When the buttons on the projector’s control panel are locked, press the EXIT button on the projector for about 10
sec. to unlock them (The key lock setting on the projector becomes Unlock).
Auto Key Lock
Enables or disables Auto Key Lock.
← Displays the currently selected item with asterisk (*).
←
Displays the setting.
Enable Enables the auto key lock function.
This applies the key lock automatically if you do not perform any operations from the main unit
control panel for 30 seconds after entering the standby state. If you do not perform any
operations for 30 seconds after releasing the key lock, the key lock is applied again.
Disable Disables the auto key lock function.
Although the key lock becomes active after entering the standby state, once you release the key
lock it is not automatically applied.
3D Connector
Selects the port for 3D video systems used as the control signal input/output for the 3D video system.
If you select “Not Use”, the GP I/O port is used as the control signal input/output for the 3D video system. If you select “Use”,
the 3D port is used as the signal input for the 3D video system.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Not Use Does not use the 3D port as the control signal input/output for the 3D video system (uses the GP
I/O port).
Use Uses the 3D port as the control signal input/output for the 3D video system.