3> When the computer detects that <Alt> or <Ctrl> and <E> keys are pressed, you see the following
messages and the menu.
Emulex FC BIOS configuration utility selected
Bringing the Link up, Please wait...
Emulex LightPulse FC BIOS Utility. KA6.01a12
This utility displays and saves changes when selected.
You will be prompted to reboot for all changes to take effect.
Emulex FC Ports in the System:
1. LPe16002B-M6-N: Bus:02 Dev:00 Func:01 WWPN: 10000090FA211129
2. LPe16002B-M6-N: Bus:02 Dev:00 Func:00 WWPN: 10000090FA211128
Enter <Esc> to exit <PageDn> to Next Page
<
↑
/
↓
> to Highlight, <Enter> to Select
Copyright (c) 1997-2012 Emulex. All rights reserved.
If the above menu is not displayed and the window has gone to the next
one, press <Alt>, <Ctrl> and <Del> keys simultaneously to reboot the
computer. Then, start the steps from the beginning.
The LPe16002B of Function “00” is Port0 and Function “01” is Port1.
The above message sample is just for your reference. Some of them may
be different depending on the computer or its configurations.
4> A FC controller listing is displayed, and you can confirm WWPN address.
5> If you have finished to confirm all WWPN addresses, enter "ESC" (Exit) to exit the menu. Then enter
“Y” to reboot the computer.
Your changes have been saved.
Reboot the system for all changes to take effect.
REBBOT THE SYSTEM? <Y/N>:
Tips
WWPN address
Port1
Port0
- 61 -
