NEC N8151-50, Руководство пользователя

Страница: 100 / 108

98 Troubleshooting Checklist
Troubleshooting Checklist
If this product fails to operate as expected, consult the following checklist and verify the product
before returning it for repairs. If the device is exhibiting any of the symptoms listed, take the
actions indicated.
No. Symptom
Internal/
Action
External
1
2
❑
The drive does not turn
on.
❑
The LED does not light.
❑
The drive is not properly
detected during startup.
Internal
External
Internal
External
❑
Make sure that the DC cable is correctly
connected to the drive.
❑
Some integrated drives have two power
connectors (some drives require a special DC
cable). Check the User’s Guide and make sure
that the drive is correctly plugged into a power
outlet.
❑
Check the power contacts of the DC cable by
unplugging the cable and then plugging it back.
❑
Make sure that the AC cable is correctly
connected to the drive.
❑
Make sure that the AC cable is correctly
plugged into the power outlet.
❑
Make sure that the SCSI cable is correctly
connected to the drive.
❑
Make sure that the SCSI cable is correctly
connected to the SCSI connector (SCSI board
connector, motherboard connector, etc.).
❑
Make sure that there is no other drive on the
SCSI bus with the same SCSI ID.
→
If you find a drive with the same SCSI ID,
change the ID of one of the drives to an ID
that is not currently in use. (Do not use “7 ”,
as this ID is assigned to the host.)