- 3 -
N8140-819 ラック用ハンドル/Rack Handle
856-129341-819- A Rev.2
Safety Precautions
The symbols used in this document are defined below.
Be sure to read and understand these precautions in order to use this product safely.
When installing this product in a rack, be sure to read the rack user's guide before installation.
CAUTION
Ignoring these precautions when handling this product can lead to malfunctions of the main
unit, injuries, fire, and damage to peripheral equipment.
Be sure not to smash or jam fingers when installing/uninstalling this product
on/from a rack.
After removing this product from its packaging, do not place it where it will be
exposed to large amounts of dust, water or other liquids.
Make sure that the rack is securely installed before attaching any optional
products to it, such as exterior equipment. Doing so can cause damage to the
product, cause the rack to fall over or other accidents.
When conducting work at the top of the rack, be sure to use a stepladder, etc.,
to ensure safety.
When installing or uninstalling exterior equipment, be sure to work in teams of
two or more people. Ignoring this can lead to injuries and damage to the
product.
We recommend asking a maintenance and after-service company to install/uninstall this product
on/from a rack.
Preface
This product is a dedicated handle set with special keys for the 25U, 37U and 42U racks
(N8140-500/501/502/503[F]/504/505[F]/506/510[F]). This product is changed the standard
handle in order to install the dedicated lock in each rack. This product is a set of two
handles common to both front and rear doors.
Components
The box includes the following items. Check the component checklist to make sure that all
components are included. Contact your retailer if there are any missing or damaged articles.
No.
Description
Qty
Remarks
1
Handle set
1
Set of handles, screws and keys
2
Component checklist
1
Refer to this checklist for the parts.
3
Setup guide
1
This document.
Required Tools
Phillips screwdriver #2
Maintenance
Vibrations can cause screws, bolts and other fasteners to loosen. Inspect these fasteners every
six months to make sure that they are not loose.
Disposal
Be sure to follow your local disposal regulations when disposing of this product. Ask your local
government for details.
General prohibition for unspecified items.
General caution/warning for unspecified items.
Instructions for general users for unspecified items.
Be sure to operate this product in line with the instructions.
Component checklist
Handle set
Setup guide
N8140-819
Rack Handle
Setup Guide
Be sure to read this document before using the product and observe the precautions.
Please store this document so that it is readily available if needed.
Be sure to include this document if transferring or selling this product to a third party.
- 4 -
N8140-819 ラック用ハンドル/Rack Handle
856-129341-819- A Rev.2
Installation
When installing this product in a rack, be sure to also read the rack user's guide before installation.
Number of Workers
WARNING
Install/remove the front and rear doors of the rack in pairs.
Working alone could lead to injury or damage to the rack.
Falling-off Caution
When removing the door, do not unlock the door bottom hinge.
Doing so could cause the rear door to fall off and damage it or
lead to injury.
Storing Keys
CAUTION
The system manager should store the front and rear door keys.
Memo
①
Remove the door to change the handle from the rack.
Refer to the rack user's guide for removing the door.
②
Refer to the illustration below and change the handle.
After remove the two screws securing the handle, attach the prepared handle with the two screws.
③
Reattach the removed door to the rack. Refer to THE rack user's guide for attaching the door.
Pulling out the handle will release
the lock and allow the door to open.
Red
: Locked
Green : UnLocked
Front door
Rear door
M6 Screws
Handle
