NEC N8104-209, Руководство пользователя

Страница: 43 / 51

E-16
3. Driver/Firmware Setup
The driver of this product is included “Starter Pack” of EXPRESS SERVER. “Starter Pack” is published on NEC
web site. Starter Pack can be downloaded from NEC's support site.
In addition, the driver may be temporarily released. Check the support information of this site and apply it as
necessary.
Firmware is also included in the Starter Pack, so please apply it as necessary.
Support site URL:
http://www.nec.com/express/
NOTE:
 To apply the driver / firmware, start Starter Pack and select the "Integrated installation" menu.
 Update the driver and firmware at the same time (recommended)
 Update the firmware with Starter Pack when adding boards or replacing them with maintenance parts.
 To update the firmware, start the SPP (Standard Program Package) on Starter Pack.
Select and update according to the product model number of the line whose "type" column is "Firmware",
refer to the following,
N8104-178/179 : HPE Broadcom NX1 Online Firmware Upgrade Utility
N8104-180/181 : HPE Intel Online Firmware Upgrade Utility
N8104-209 : Intel Online Firmware Upgrade Utility
 The firmware update is applied to all the same type boards mounted on the server / the same series of chip
mounting boards.
 If the firmware on the board is newer than that of Starter Pack, it will not be updated automatically.
It is possible to forcibly downgrade. (Please activate the slide switch written as forced on the screen)
 After updating the firmware, turn the server AC power off and then on again.