- 5 -
*856-127021-123- BN*
本書は再生紙を利用しています
This guide is made from recycled paper.
Precaution on operation
Ground yourself to dissipate any static charge before handling
the adapter.
To prevent any damage on components due to static electricity, make sure to
discharge static electricity from yourself before you touch N8104-123A adapter.
Don’t touch uncoated metal parts on adapter.
Never touch N8104-123A adapter’s LAN port, terminals of components or
uncoated metal parts on adapter. Otherwise, taint, erosion or others may cause
loose connection. Do not touch this product with wet or dirty hands.
Excessive force could break the connector.
On installing this adapter, do not insert it by force. Otherwise, N8104-123A
adapter and the server may be damaged.
Don’t touch the tip of bracket to other parts of server
When you insert N8104-123A adapter into expansion slot, be careful not to
touch the tip of bracket to other parts of server (such as other components or
board). Otherwise, they may be damaged.
Firmly connect the network cable
When connecting the cable, insert the cable connector until you hear a click
sound.
Description
クラス
1
レーザ 製品
PCI-Express Connector
Bracket
LAN Port
Rubber Cap
z
LAN port
A LC type Connector to access to the network. For the types of connectable
cables and how to connect, see “Network Cables”
z
PCI-Express Connector
Attach PCI–Express connector to PCI-Express expansion slot in the server.
This adapter supports more than x8 lane (x8,x16), and is compliant with
PCI-Express 1.0a(or newer) specifications.
z
Rubber Cap
A dust-proof cover. Keep any vacant LC connector covered when you do not use
it or when you transport it. Keep all covers for future use.
z
Bracket
Full-height bracket is attached by default.
If you have a low-profile computer cabinet, replace the original full-height bracket
with the low-profile bracket supplied in the product package.
z
Lamp
Lamp Status
Meaning
Green Link
Established
Amber
Data being transmitted /received
Red
Unload device driver
LINK/ACT
Off
Link not established
LINK/ACT
Ch
e
lsio
Co
m
m
un
ic
a
tio
ns
LAN port
LINK/ACT
If DC power of the server is OFF, Lamp does not light. (OFF)
Network Cables
N8104-123A 10GBASE-SR Adapter has an optical fiber interface based on IEEE802.3ae
10Gigabit Ethernet standard. The 10GbE SR standard enables 10GbE and full duplex
transmissions at distances up to 300 meters using standard multi-mode fiber (MMF) cabling.
Supported MMF cable listed below:
Connector type : LC
core/clad diameter
Modal bandwidth
Cable length
400MHz
・
km
2
～
66 m
500MHz
・
km
2
～
82 m
50/125µm
2000MHz
・
km
2
～
300 m
160MHz
・
km
2
～
26 m
62.5/125µm
200MHz
・
km
2
～
33 m
Hardware Installation
Refer to the Express5800 Server User’s Guide for hardware installation.
Bracket Replacement
If you have a low-profile computer cabinet, replace the original full-height bracket with
the low-profile bracket supplied in the product package.
1. Remove screws (2pieces) ,and remove full-height bracket from the board.
2. Attach the low-profile bracket to the board.
3. With screws , fix the bracket to the board.
Replacement
Screw
Board
Full-height Bracket
(Original)
Low-Profile Bracket
Driver Installation
Refer to the User’s Guide on Driver Disk supplied in the product package.
See the “
N8104-123A UsersGuide.pdf
” file in the root folder on Driver Disk.
N8104-123A
10GBASE-SR
接続ボード
10GBASE-SR Adapter
スタートアップガイド
/ Startup Guide
第
2
版
/ 2nd Edition
2007
年
11
月
/ November 2007
日本電気株式会社
〒108-0001
東京都港区芝5丁目7－1
TEL (03) 3454-1111（大代表）
NEC Corporation
7-1 Shiba 5-Chome, Minato-Ku
Tokyo 108-8001, Japan
