- 38 -
4.
Connect the LED cable (provided with the computer) to the LED connector on this product.
Notice
This operation is not necessary when you connect SCSI device as a backup device
to this product.
The type of LED cable and the method for removing and installing the connector vary
depending on your computer. Be sure to read the computer User’s Guide attached
to the product.
Check
The LED connector of this product is 4-pins
[Connect 2-pins LED Cable (Case 1)]
[Connect 2-pins LED Cable (Case 2)]
5.
Replace the cover and components removed in item 2.
6.
Plug the power cord of the computer into the electrical outlet.
Cable (Red)
Cable (Red)
