![background image](http://html1.mh-extra.com/html/nec/n8100-2836f/n8100-2836f_user-manual_4540076036.webp)
4. Names and Functions of Parts
Express5800/R120h-2M (3rd-Gen) User’s Guide
36
Chapter 1 General Description
・
12x3.5-inch drive model
No.
Item
Status
Description
1 STATUS
LED
*1
Lights in green
Normal state
Flashes in green (once per
second)
Restarting iLO
Flashes in amber
The function of the system is deteriorating
*3
Flashes in red (once per
second)
The system is in a critical state
*3
2
Power Switch and system
power LED
*1
Lights in green
The system is powered on
Flashes in green (once per
second)
The power on sequence in progress
Lights in amber
The system is in standby state
Lights off
Power is not supplied
*2
3
LINK/ACT LED*1
Lights in green
Linked to the network
Flashes in green (once per
second)
The network is working
Lights off
The network is not working
4 UID
Switch/LED
*1
※
Do not reboot the iLO from
the boot of the server until
the completion of the OS
boot and during using the
System Utilities.
Lights in blue
Working in operation
Flashes in blue (once per
second)
Remote management or firmware upgrade is
in progress
Flashes in blue (4 times
per second)
The iLO restart sequence using the UID
switch has been launched
Flashes in blue (8 times
per second)
The iLO restart sequence using UID switch
is in progress
Lights off
Not working
*1
If all the four LEDs described in this table is flashing at the same time, it indicates that a power failure has
occurred. For details, refer to
(2) Power failure LED
.
*2
The power is not supplied, the power cord is not connected, the power supply unit is not installed, the
power supply unit is defect, or the power cord is disconnected.
*3
If the STATUS LED indicates a degraded or critical condition, check the system IML or use iLO to check
the system status.