General Description 2-5
(1) Handles (1 at the right and left each)
Hold the handles when dismounting/mounting the server from/in the rack.
(2) Optical disk drive bay
Attach an optional optical disk drive. (See page 180.)
One of the following drives will be installed, according to the model or the purchase order.
−
DVD-ROM drive
−
DVD Super Multi drive
(2)-1
Manual ejection hole
(2)-2
Disk access LED
(2)-3 Tray
ejection
button
(3) Hard disk drive bays
Bays that hold hard disk drives (For details, see page 199.) The last digit indicates the port
number. In the standard configuration, all bays have a dummy tray.
(4) DISK LED (green/amber)
Hard disk drive LED. (See page 164.)
Each hard disk drive LED is green during access to the hard disk drive. The LED turns
amber if the hard disk drive fails. The LED flashes switching back and forth between green
and amber during build processing (only in RAID System).
(5) Backup Device Bay
This is where the optional DAT drive, AIT drive, and similar devices are installed. (For
details, see page 258.)
(6) UID (Unit ID) switch
Press this switch to turn on/off the UID LEDs on the front and rear panels of the server.
Pressing the switch once turns on the LEDs. Pressing it again turns them off. (See page
187.)
(The LED also goes on or flashes when software issues a command.)
(7) POWER
switch
Press this switch to turn on/off the power. (See page 184.)
Pressing the switch once turns on the power, and the POWER LED goes on. Pressing it
again turns off the power. Continuing to press the switch for 4 seconds or more forcibly
turns off the power. (See page 327.)
* This server does not support sleep functions.
(8) RESET
switch
Press this switch to reset the server. (See page 312.)
(9) DUMP (NMI) switch
Press this switch to dump system memory. (See page 398.)
(10) USB
connectors
Connect device compliant with the USB interface to the connectors. (See page 179.)
(11) Monitor
connectors
This connector is used to connect a display. (For details, see page 179.)
This connector cannot be used if the back monitor connector is being used.
(12) Slide
tag
A label indicating the N code and serial number of the server is attached.
Содержание N8100-1644F
