English-5
English
Quick Start
To attach the MultiSync V Series monitor to your
system, follow these instruction:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card. For more information, refer to the
display card manual.
3.
For the PC:
Connect the 15-pin mini D-SUB of the captive signal
cable to the connector of the display card in your system (
Figure A.1
)
Tighten all screws.
For the Mac:
Connect the Macintosh Cable Adapter (not included) to
the monitor connector on the Macintosh (
Figure B.1
). Attach the
15-pin mini D-SUB end of the captive signal cable to the Macintosh
cable adapter on the computer (
Figure B.1
). Tighten all screws.
4. Connect one end of the power cord to the MultiSync V Series monitor
and the other end to the power outlet (
Figure C.1
).
5. Turn on the monitor (
Figure D.1
) and the computer.
6. This completes the installation.
NOTE:
If you have any problems, please refer to the
Troubleshooting
section of this User‘s Manual.
Captive Signal Cable
15-pin-mini-D-SUB
Figure A.1
