NEC MultiSync V554Q-R Скачать руководство пользователя

Страница: 20 / 76

English-18

Connecting a USB device

USB1:

USB downstream port (Type-A).

Connect a USB compatible flash memory or keyboard to Down Stream Port.

USB2:

USB upstream port (Type-B).

Connect to a USB compatible computer with a USB cable.

A USB compatible computer connected to USB2 can control the devices connected to USB1.

USB CM1 (2A): Power supply port.

Please refer to the specifications page for power supply information (see

page 71

USB CM2:

Service port.

Please do not connect devices.

USB MP:

USB downstream port (Type-A).

To use the Media Player function, please use this port.

• Please make sure the connector shape and orientation

is correctly aligned when connecting the USB device or cable.

• Depending on the use of computer BIOS, OS or device, the USB function may not be working. In this case, please check

user’s manual of your computer or device, or contact your supplier for detailed information.

• Before turning off the main power switch of the monitor or shutting down Windows

, please turn off the USB function and

remove the USB cable from the monitor. You may lose data when the computer crashes.

• It may take a few seconds until the monitor recognizes the USB input. Do not disconnect the USB cable or

disconnect and

reconnect the USB cable before the monitor recognizes the input.

•

You can set power supply for USB CM1 (2A) at [USB POWER] in the OSD menu (see

page 43

•

When you use the USB CM1 (2A) port for power supply, please use a USB cable that supports 2A.

•

Please refer to the [USB] in the OSD menu (See

page 43

) for the USB setting.

NOTE:

USB CM1 (2A) and USB CM2 are not corresponding port.
Please refer to the connection (See

page 16

) to connect USB devices to the monitor.

CAUTION:

Do not bind the USB cable. It may trap heat and start a fire.

Содержание MultiSync V554Q-R













































































Результаты поиска

Содержание MultiSync V554Q-R

Отзывы:

Похожие инструкции для MultiSync V554Q-R

Бренды по названию

Популярные бренды

NEC MultiSync V554Q-R, Руководство пользователя

Результаты поиска

Содержание MultiSync V554Q-R

Отзывы:

Похожие инструкции для MultiSync V554Q-R

Бренды по названию

Популярные бренды