![background image](http://html.mh-extra.com/html/nec/multisync-lcd1560vm/multisync-lcd1560vm_user-manual_1667367012.webp)
English-6
Controls
OSM (On-Screen-Manager) Controls
The OSM controls on the front of the monitor function as follows:
To access OSM press any of the control buttons (<, >, -, +, EXIT).
To change signal input, press the SELECT button.
NOTE:
OSM must be closed in order to change signal input.
NOTE:
When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the
RESET function by pressing the EXIT button.
Menu
Exits the OSM controls.
Exits to the OSM main menu.
Moves the highlighted area left/right to select control menus.
Moves the highlighted area up/down to select one of the controls.
Moves the bar left/right to increase or decrease the adjustment.
Active Auto Adjust function. Enter the OSM controls. Enter the OSM sub menu.
Resets the highlighted control menu to the factory setting.
When no OSM menu is shown, the speaker sound will be muted.
Control
EXIT
< / >
-
/
+
SELECT
RESET/MUTE
NOTE:
This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting.
To meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability
under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g.
GS mark).
4 SCREWS
(MAX depth: 8.6 mm)
If use other screw,
check depth of hole.
Weight of LCD assembly: 3.5kg (MAX)
Replace screws
Tighten all screws
Thickness of bracket (arm)
2.0 ~ 3.2 mm
75 mm
75 mm
01_English
16/10/02, 5:16 pm
6
Содержание MultiSync LCD1560VM
Страница 6: ...01b_XChapterOpener 16 10 02 5 16 pm 2 ...
Страница 119: ...xx_Back 16 10 02 5 21 pm 1 ...
Страница 120: ...Printed on recycled paper xx_Back 16 10 02 5 21 pm 2 ...