Step 2
Make sure that your computer is set up for 1024x768 resolution.
Open the Display Properties window by following this mouse click sequence
(((((1
1
1
1
1, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
, 2, 3, 4, & 5)
indicated
by the numbered arrows below.
Step 3
Repeat Step 1.
This will ensure that the monitor is auto-adjusted to the new resolution.
On the right side of the Display Properties window, there is a box labeled
Display
area
. Make sure the
„Screen‰
slide bar
(6)
(6)
(6)
(6)
(6)
is set to
1024x768
.
You may have to restart your computer for this change to take effect. After the restart,
double check the
Display Properties/Settings
window to make sure you are
now at
1024x768
.
(For analog input, proceed to Step 3.)
2
1
3
4
5
6
If you have questions regarding the setup of your MultiSync LCD monitor, please refer to the user’s manual
or contact the NEC Technical Support Center at 1-800-632-4662.