English-15
English
Tools
VOLUME
Controls the volume of the speakers or headphones.
To mute the speaker output, touch the “PBP/RESET” key (EA274WMi), “
/RESET” key (EA304WMi).
SOUND INPUT (HDMI, DisplayPort inputs only)
This function selects Audio Input, HDMI or DisplayPort.
When PBP MODE is “ON”, outputs the audio signal that is associated with the adjustable screen’s video signal (HDMI
or DisplayPort) or the audio from the input audio jack (AUDIO INPUT) on the back of the monitor (right side of display
below USB port).
VIDEO DETECT
Selects the method of video detection when more than one video inputs are connected.
FIRST:
When current video input signal is not present, then the monitor searches for a video signal from the other
video input ports. If the video signal is present in another port, then the monitor switches the video source input port
to the new found video source automatically. The monitor will not look for other video signals while the current video
source is present.
NONE:
The monitor will not search the other video input port unless it is turned on.
PBP MODE
Activates PICTURE BY PICTURE (split screen) function and selects the priority (adjustable) screen.
OFF:
PBP is OFF. Shows a single screen.
LEFT:
PBP is ON. Shows 2 screens. The left screen is select as the priority screen, meaning that any settings will
apply to the left screen.
RIGHT:
PBP is ON. Shows 2 screens. The right screen is select as the priority screen, meaning that any settings will
apply to the right screen.
NOTE:
When “LEFT” or “RIGHT” is selected, only the selected screen is available to be adjusted.
PBP TYPE
Selects the size of the sub-picture used in PICTURE BY PICTURE (split screen) mode.
AUTO:
Shows 2 screens based on the INPUT RESOLUTION and EXPANSION settings for the priority (adjustable)
screen selected in PBP MODE. The available signals used for PBP mode are limited to the following combinations
only.
CENTER:
Splits 2 screens divided evenly from the center.
Right picture Source
DVI*
3
D-SUB
HDMI
DP
Left
Picture
Source
DVI*
3
Yes*
1
Yes
Yes
Yes
D-SUB
No
Yes*
2
Yes*
2
Yes*
2
HDMI
No
Yes*
2
Yes*
2
Yes*
2
DP
No
Yes*
2
Yes*
2
Yes*
2
*1 When PBP TYPE is selected to AUTO, the “left picture” is displayed on the left half of the display only.
*2 When PBP TYPE is selected to AUTO, the “right picture” is displayed on the right half of the display only.
*3 DualLink
RESPONSE IMPROVE
Turns the Response Improve function on or off. Response Improve may reduce blurring that occurs in some moving
images.
OFF TIMER
Monitor will automatically power down when you have selected a pre-determined amount of time.
Before powering off, a message will appear on the screen asking if you want to delay the turn off time by 60 minutes.
Touch any OSD key to delay the power-down time.
POWER SAVE TIMER
POWER SAVE TIMER allows the monitor to turn off automatically after continuing power saving mode for 2 hours.
LED BRIGHTNESS
You can adjust the blue LED brightness.
DDC/CI
This function allows the DDC/CI function ON or OFF.
