English-9
English
Flexible Arm Installation
This LCD monitor is designed for use with a fl exible arm.
To prepare the monitor for alternate mounting purposes:
•
Follow the instructions provided by the manufacturer of the display mount.
•
To meet the safety requirements, the mounting stand must be able to support the weight of the monitor and be UL-certifi ed.
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place a hand on each side of the monitor and lift up to the highest position.
3. Place monitor face down on a non-abrasive surface (
Figure S.1
).
NOTE:
Handle with care when the monitor is facing down.
Figure S.1
4. Remove 2 bottom screws fi rst: Move stand left and right to remove bottom 2 screws (
Figure S.2, S.3
).
5. Remove 2 top screws.
6. Remove the stand (
Figure S.4
).
7. The monitor is now ready for mounting in an alternate manner.
8. Connect the cables to the back of the monitor.
NOTE:
Handle with care when removing monitor stand.
Figure S.2
Figure S.3
Figure S.4
