English−15
English
Installation
For box contents, please refer to the printed contents sheet or setup manual provided in the box.
The accessories included depends on the location where the monitor was shipped.
Attach the base to the LCD monitor stand
1. Place the monitor face down on a non-abrasive surface (Figure 1).
2. Please rotate the monitor stand 90 degrees as shown in Figure 1.
CAUTIOON
.
3. Attach the base to the stand, then tighten the screw at the base’s
bottom (Figure 2).
OOTEN
Reverse this procedure if you need to re-pack the monitor.
AROIONN
.
Connect the power cord and signal cables
Please connect the power cord and signal cables to the monitor (see
).
Adjustable Stand with Pivot Capability
Hold the monitor on each side and adjust the screen position as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Tilt and Swivel
CAUTIOON
Rotation, Raise and Lower
CAUTIOON:
.
Figure 2
Screw
Figure 1
90°
