E-16
AUDIO OUT
L
AUDIO IN
L
R
R
Component
Y
Cb
Cr
RGB 1 IN
RGB 2 IN
Connecting Your DVD Player
DVD player
You can connect your projector to a DVD player with component output
or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a
commercially available component video cable (RCAX3) and the op-
tional 15-pin-to-RCA (female)
⳯
3 cable to connect your DVD player
to the RGB IN1 or IN2 connector on the projector.
Component video RCA
⳯
3 cable
(not supplied)
For a DVD player without component video (Y,Cb,Cr) output, use com-
mon RCA cables (not provided) to connect a composite VIDEO out-
put of the DVD player to the Video Input of the projector.
3. Turn on the projector and DVD player.
NOTE:
Refer to your DVD player's owner's manual for more information about
your DVD player's video output requirements,
Optional 15-pin-to-RCA
(female)
⳯
3 cable (ADP-CV1)
Audio cable
(not supplied)
Audio Equipment
RCA(female)-to-BNC(male)
adapter (not supplied)
Содержание MT1060 Series
Страница 1: ...LCD Projector MT1075 MT1065 User s Manual ...
Страница 5: ...Portable Projector MT1075 MT1065 User s Manual English Deutsch Français Italiano Español Svenska ...
Страница 74: ...Ver 1 4 04 ...
Страница 75: ...Printed in Japan 7N8P4431 Printed on recycled paper PRINTED WITH SOYINK T M ...