NEC MT-2550-24874C, Руководство по обслуживанию

Страница: 92 / 214

2-50 Setup and Operation
6. From the Windows 95 desktop, click Start , point to Programs , and click
Windows Explorer .
7. In the Exploring menu, click View , point to Options , and select Show all files .
Click
OK
.
8.
Select the CD-ROM drive and copy the contents of the
doscdrom
folder to the
diskette.
9. Double click the Win95 folder on the CD-ROM. Copy the piix3ide folder to the
diskette.
NEC 16X CD-ROM Drivers
Load the NEC 16X CD-ROM Drivers into a system equipped with Windows

95 as
follows.
NOTE:
Do not proceed until you have followed
the procedure in “Preparation” above.
1. Modify the system’s config.sys and autoexec.bat files to add CD-ROM drivers.
See the directions in the MS-DOS documentation.
2.
Reboot the system.
PIIX3 IDE Drivers
Load the PIIX3 IDE Drivers into a system with the Windows

95 operating system as
follows.
NOTE:
Do not proceed until you have
performed the procedures in “Preparation” and
“NEC 16X CD-ROM Drivers” above.
1.
If necessary, reinsert the diskette used during the preparation procedure into
drive A.
2. From the Windows 95 desktop, double click the following icons: My Computer ,
3 1/2 Floppy (A:) , and piix3ide . Double click the setup icon in the piix3ide
window.
3.
Click
Next
in the 82371SB IDE Setup window when notified that the
Mshdc.inf
file is being backed up and modified.
4. Click Next to confirm the process.