English-4
Quick Start
To connect the LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2.
For a PC or MAC with DVI digital output:
Connect the DVI signal cable to the connector of the display controller in your
system (
Figure A.1
). Tighten all screws.
For a PC with Analog output (MDview 232/243 only):
Connect a 15-pin mini D-SUB to DVI-A signal cable (not included) to
the connector of the display controller in your system (
Figure A.2
).
For an Apple:
Connect an Apple to DisplayPort cable adapter (not included) to the computer, then attach the DisplayPort
cable to the Apple to DisplayPort cable adapter (
Figure A.3
).
NOTE:
Some Apple systems do not require an Apple cable adapter.
For a PC with DisplayPort output:
Connect the DisplayPort cable to the connector of the display controller in your system
(
Figure A.4
).
Figure A.1
Figure A.3
Apple Cable Adapter
(not included)
Figure A.2
Figure A.4
DisplayPort cable
NOTE:
1. Please use a DisplayPort cable with a DisplayPort logo.
2. When removing the DisplayPort cable, hold down the top button to release the lock.
3. Height adjustment is locked by a lock button. Place hand on top of the monitor to push down the screen to the lowest
position. Slide the lock button to unlock (
Figure B.1
).
NOTE:
Handle with care when unlocking the stand.
Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position.
Slide the cable cover up (
Figure B.2
).
NOTE:
The
cable cover is not removable.
Figure B.1
Figure B.2
30° Tilt
Cable cover
