manualshive.com logo in svg

NEC MD302C6, Инструкция по установке и обслуживанию

Поделиться
Скачать
NEC MD302C6 Скачать руководство пользователя страница 19

English-15

English

Press the plus (+) button on the front bezel without displaying the OSD menu and the input source of INPUT 2 is switched.

The following shows an example of the case when Displayport is selected for the input source of both INPUT 1 and Input 2, and 
the input source of INPUT 2 is switched to DVI.

NOTE:

 

Using INPUT 1 and INPUT 2 with different input sources (DVI + DisplayPort) is not recommended for standard 
applications. It may result in slight differences of luminance and color between left and right screen and/or a frame 
skip (See page 9).

When “Concurrent Mode” is selected for INPUT SOURCE BUTTON MODE

Concurrent Mode allows simultaneous switching of the input source of INPUT 1 and INPUT 2.
Press either the plus (+) or the minus (-) button on the front bezel of the display without displaying the OSD menu. The input 
source of INPUT 1 and INPUT 2 will be switched simultaneously.

Содержание MD302C6





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды