English-14
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings (LUMINANCE, BLACK LEVEL, IMAGE
CONTROL, COLOR CONTROL SYSTEM, SHARPNESS, OFF MODE, OSD LEFT/RIGHT, OSD UP/DOWN, OSD
TURN OFF) back to the factory settings. Individual settings can be reset by highlighting the control to be reset and
pressing the RESET button.
Information
Provides information about the current resolution display and technical data including the preset timing being used
and the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor.
OSD Warning
OSD Warning menus disappear with Exit button.
NO SIGNAL:
This function gives a warning when there is no Horizontal or Vertical Sync. After power is
turned on or when there is a change of input signal, the
No Signal
window will appear.
RESOLUTION NOTIFIER:
This function warns if resolution other than the optimized resolution is used. After
power is turned on or when there is a change of input signal or the video signal doesn’t have proper
resolution, the
Resolution Notifier
window will open. This function can be disabled in the MENU Tools OSD.
OUT OF RANGE:
This function gives a recommendation of the optimized resolution and refresh rate. After
the power is turned on or there is a change of input signal or if the video signal doesn’t have proper timing,
the
Out Of Range
menu will appear.
BACKLIGHT LIFETIME:
At 1000/500/0 hours, the OSD warning will be displayed. The display cannot hold
user set luminance levels, however, white balance will be maintained. Please contact your supplier when
this OSD warning is displayed.
LUMINANCE WARNING:
This function indicates when the LUMINANCE setting cannot be complete.
NOTE:
It is possible to change the DVI SELECTION, to change the OFF MODE or to change the settings
while the “NO SIGNAL” or “OUT OF RANGE” messages are displayed.
If you need detailed information about the controls, please use the advanced menu.
