NEC LED-A019i, Руководство по установке

Страница: 24 / 228

English-8
Prevent Tipping
When using the supplied eye bolts
CAUTION:
When using the LED Poster with the pedestal stand, fasten the LED Poster to a wall using a cord or
chain that can support the weight of the LED Poster in order to prevent the LED Poster from falling.
Fasten the cord or chain to the LED Poster using the eye bolt.
CAUTION: • Do not attempt to hang the LED Poster using an installation safety wire. The LED
Poster must be properly installed.
• When installing, do not apply pressure to the LED Poster or excessive force to any
part of the LED Poster by pushing or leaning on it. This may cause the monitor to
become distorted or damaged.
• Please install LED Poster in a spot of the wall or ceiling strong enough to support the
LED Poster.
• To prevent the LED Poster from falling off from the wall or ceiling, NEC strongly
recommends using a safety wire.
• Prepare the LED Poster using mounting accessories such as hook, eyebolt or
mounting parts and then secure the LED Poster with a safety wire. The safety wire
must not be tight.
• Please make sure the mounting accessories are strong enough to support the monitor
before mounting it.
• These eye bolts should not be used to suspend the LED Poster.
CAUTION: Be sure to remove the cord or chain from the wall before moving the LED Poster.