English-10
Image Controls (Analog input only)
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability by increasing or decreasing this setting.
Colour Control System
Colour Control System:
Six colour presets select the desired colour setting (sRGB and NATIVE colour presets are
standard and cannot be changed).
R,G,B:
Increases or decreases Red, Green or Blue colour depending upon which is selected. The change in colour
will appear on screen and the direction (increase or decrease) will be shown by the bars.
NATIVE:
Original colour presented by the LCD panel that is unadjustable.
sRGB:
sRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGB
colour space. With this colour supported environment, the operator could easily and confidently communicate colour
without further colour management overhead in the most common situations.
NOTE:
When MOVIE, GAMING, or PHOTO is selected as the DV MODE, NATIVE is selected automatically as the
six colour preset and cannot be changed.
Tools
SHARPNESS:
Adjust the image to get distinct or as soft a picture as is preferred.
EXPANSION:
Selects the zoom mode.
FULL:
The image is expanded to 1920 x 1200, regardless of the resolution.
ASPECT:
The image is expanded without changing the aspect ratio.
OFF:
The image is not expanded.
OFF TIMER:
Monitor will automatically power-down when the end user has selected a predetermined amount of
time.
LED BRIGHTNESS:
You can adjust the Green LED brightness.
HOT KEY:
You can adjust the brightness and contrast directly. When this function is set to ON, you can adjust the
brightness with left or right control and contrast with up or down control while the OSD menu is off.
INPUT RESOLUTION (Analog Input Only):
Selects resolution’s priority of input signal to one of the following pair:
1360 x 768, 1680 x 1050 or 1280 x 768, 1680 x 1050 or 1024 x 768, 1400 x 1050.
1360 x 768, 1680 x 1050:
Determines the resolution to 1360 x 768, 1680 x 1050.
1280 x 768, 1680 x 1050:
Determines the resolution to 1280 x 768, 1680 x 1050.
1024 x 768, 1400 x 1050:
Determines the resolution to 1024 x 768, 1400 x 1050.
DDC/CI:
This function allows the DDC/CI function ON or OFF.
FACTORY PRESET:
Selecting Factory Preset allows you to reset all OSD control settings back to the factory
settings. The RESET button will need to be held down for several seconds to take effect. Individual settings can be
reset by highlighting the control to be reset and pressing the RESET button.
Menu Tools
LANGUAGE:
OSD control menus are available in eight languages.
OSD LEFT/RIGHT:
You can choose where you would like the OSD control image to appear horizontally on your
screen.
OSD DOWN/UP:
You can choose where you would like the OSD control image to appear vertically on your screen.
OSD Turn Off:
The OSD control menu will stay on as long as it is in use. In the OSD Turn Off submenu, you can
select how long the monitor waits after the last touch of a button to shut off the OSD control menu.
OSD Lock Out:
This control completely locks out access to all OSD control functions without Brightness and
Contrast. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the
OSD controls are locked out. To activate the OSD Lock Out function, press SELECT, then right control button and
hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then left control button and hold down
simultaneously while in the OSD menu.
RESOLUTION NOTIFIER:
This optimal resolution is 1920 x 1200. If ON is selected, a message will appear on the
screen after 30 seconds, notifying you that the resolution is not at 1920 x 1200.
