Information
DISPLAY MODE:
Provides information about the current resolution display
and technical data including the preset timing being used and the
horizontal and vertical frequencies.
MONITOR INFO:
Indicates the model and serial numbers of your monitor.
OSM
™
Warning
NO SIGNAL:
This function gives a warning when there is no signal
present. After power is turned on or when there is a change of input
signal or video is inactive, the
No Signal
window will appear. The
PROCEED button opens the DVI SELECTION CONTROL, as indicated in
the section for DVI selection.
RESOLUTION NOTIFIER:
This function gives a warning of use with
optimized resolution. After power is turned on or when there is a
change of input signal or the video signal doesn’t have proper
resolution, the
Resolution Notifier
window will open. This function
can be disabled in the TOOL menu.
OUT OF RANGE:
This function gives a recommendation of the
optimized resolution and refresh rate. After the power is turned on or
there is a change of input signal or the video signal doesn’t have
proper timing, the
Out Of Range
menu will appear. The PROCEED
button opens the DVI SELECTION CONTROL, as indicated in the
section for DVI selection.
CHECK CABLE:
This function will advise you to check all Video Inputs
on the monitor and computer to make sure they are
properly connected.
NOTE:
If “ CHANGE DVI SELECTION ” is displayed, switch to DVI
SELECTION.
Controls cont.
ols
11
CN912A/LCD1810X/78135311
00.3.13, 4:11 PM
13
